Acer PW.NAT05.002 Page 39 User Manual Download

Page: 39 / 72

Expansion cards

The computer does not recognize an

expansion card

•

Shut down and restart your computer.

•

Make sure that you have installed the

required software. For more information,

see the documentation that came with

your expansion card.

File management

A file was accidentally deleted
If a file was deleted while holding down the

HIFT

key, the file cannot be restored.

To restore deleted files:

1 Double-click the Recycle Bin icon.
2 Right-click the file you want to

restore, then click Restore. The file is

restored to the place where it was

originally deleted from.
If the Recycle Bin was emptied before

you try to restore a file, the file

cannot be restored.

Hard drive

You see an “Insufficient disk space” error

message

•

Delete unnecessary files from the hard

drive using Disk Cleanup.

Help

For more information about restoring deleted files, click

Start

then click

Help and Support

. Type

System Restore

in the

box, then

press

NTER

Help

For more information about file management, click

Start

, then click

Help and Support

. Type

file management

in the

box, then press

NTER

MU0000000_eM_ENG_V09A3.book Page 29 Wednesday, August 19, 2009 5:06 PM

Summary of Contents for PW.NAT05.002









































































Search results

Summary of Contents for PW.NAT05.002

Reviews:

Related manuals for PW.NAT05.002

Brands by name

Popular brands

Acer PW.NAT05.002, User Manual

Search results

Summary of Contents for PW.NAT05.002

Reviews:

Related manuals for PW.NAT05.002

Brands by name

Popular brands