AcerPower Minitower (M11E/IDCATX-2) User's Guide
xcii
3.5.4 Installation Procedures
The housing accepts ATX form-factor system boards. Follow these steps to install a
system board:
Before you proceed, make sure that you have
removed the power supply and that the housing is
lying flat.
1.
Align the board with the pegs on the housing frame.
2.
Gently press the board until it is properly seated.
3.
Secure the board with the required screws.
Summary of Contents for Power
