Index
lv
2.5.3
Onboard Device Settings
The Onboard Device Settings menu allows you to configure the onboard communication
ports and the onboard devices. Selecting this option from the Onboard Peripherals menu
displays the following screen:
Onboard Device Settings
Floppy Disk Controller ..............[Enabled ]
IDE Controller ......................[Both ]
PS/2 Mouse Controller ...............[Enabled ]
USB Host Controller .................[Enabled]
USB Legacy Mode ...................[Disabled]
SMBus Interrupt(IRQ9) ...............[Disabled]
Floppy Disk Controller
This parameter lets you enable or disable the onboard floppy disk controller. The default
setting is Enabled.
IDE Controller
Set this parameter to Primary to enable only the primary IDE controller; Both to enable
both primary and secondary IDE controllers; or Disabled to disable all IDE controllers.
The default setting is Both.
PS/2 Mouse Controller
This parameter enables or disables the onboard PS/2 mouse controller. The default setting
is Enabled.
Summary of Contents for Power
