Index
xxix
3.
Lower the processor into to the CPU connector on the system board until the card
edge touches the connector.
4.
Press down on the processor until the card edge completely fits into the connector and
the latches on the sides lock the processor into place.
5.
Plug the fan cable into the fan connector on the system board.
Figure 1-6
Installing a Pentium II Processor
Summary of Contents for Power
