61
MegaRAID Configuration Utility
Turn on the system power. When prompted, press <Ctrl> + <M> to
enter the MegaRAID Configuration Utility. After entering the
MegaRAID Configuration Utility, you will see the Management Menu
on the screen.
Load RAID Card Default Setting
1
Select Objects from Management menu.
2
Select Adapter from Objects. The adapter setting will be shown on
the screen. You can change the setting from this menu.
3
Select Factory Default and YES to load the default settings.
4
Press <Ctrl> + <Alt> + <Del> to reboot the server.
Create RAID1 Volume
1
After the server has rebooted, press <Ctrl> + <M> to enter the
MegaRAID Configuration Utility again.
2
Select Configuration from Management Menu.
3
Select New Configuration from the Configuration menu and select
YES to continue. An array selection window displays the devices
connected to the current controller.
4
Press the arrow keys to choose specific physical drives and press
spacebar to associate the selected drive with the current array. The
indicator for selected drive change from READY to ONLINE A[array
number]-[drive number]. For example, ONLINE A1-2 means disk
drive 2 in array 1.
5
Add 2 drives to current array and press <Enter> to finish creating
current array.
6
Press <F10> to configure the logical drives.
7
The default RAID level for 2 disk drives is RAID1. Just select Accept
to use the default setting and press <Enter> to return to the
ARRAY SELECTION MENU.
8
Press <Enter> to end the array configuration.
9
Select YES to Save Configuration and press any key to return to the
Configure menu.
BB!H421!.!FO/cppl!!Qbhf!72!!Xfeoftebz-!Gfcsvbsz!29-!3115!!5;67!QN
Summary of Contents for G310 Altos
