background image

 3 Getting Started

32

C2

Set up boot strap processor for POST

C5

Enumerate and set up application predecessors

C6

Re-enable cache for boot strap processor

C7

Early CPU Init Exit

0A

Initializes the 8042 compatible Keyboard Controller.

0B

Detects the presence of PS/2 mouse.

0C

Detects the presence of Keyboard in KBC port.

0E

Testing and initialization of different Input Devices. 
Also, update the Kernel Variables. 

Traps the INT09h vector, so that the POST INT09h han-
dler gets control for IRQ1. Uncompress all available 
language, BIOS logo, and Silent logo modules.

13

Early POST initialization of chipset registers.

24

Uncompress and initialize any platform specific BIOS 
modules.

30

Initialize System Management Interrupt.

2A

Initializes different devices through DIM.

2C

Initializes different devices. Detects and initializes the 
video adapter installed in the system that have 
optional ROMs.

2E

Initializes all the output devices.

31

Allocate memory for ADM module and uncompress 
it. Give control to ADM module for initialization. Ini-
tialize language and font modules for ADM.

Activate ADM module.

33

Initializes the silent boot module. Set the window for 
displaying text information.

37

Displaying sign-on message, CPU information, setup 
key message, and any OEM specific information.

Checkpoint Code

Description

BB!H421!.!FO/cppl!!Qbhf!43!!Xfeoftebz-!Gfcsvbsz!29-!3115!!5;67!QN

 

Summary of Contents for G310 Altos





































































































































Reviews: