manualshive.com logo in svg

Acer G310 Altos, User Manual, Page: 40 / 132

Share
Download
Acer G310 Altos User Manual Download Page 40

 3 Getting Started

30

EF

Read error occurred on media. Jump back to check-
point EB.

E9 or EA

Determine information about root directory of 
recovery media.

F0

Search for pre-defined recovery file name in root 
directory.

F1

Recovery file not found.

F2

Start reading FAT table and analyze FAT to find the 
clusters occupied by the recovery file.

F3

Start reading the recovery file cluster by cluster.

F5

Disable L1 cache.

FA

Check the validity of the recovery file configuration 
to the current configuration of the flash part.

FB

Make flash write enabled through chipset and OEM 
specific method. Detect proper flash part. Verify that 
the found flash part size equals the recovery file size.

F4

The recovery file size does not equal the found flash 
part size.

FC

Erase the flash part.

FD

Program the flash part.

FF

The flash has been updated successfully. Make flash 
write disabled. Disable ATAPI hardware. Restore 
CPUID value back into register. Give control to F000 
ROM at F000:FFF0h.

Checkpoint Code

Description

BB!H421!.!FO/cppl!!Qbhf!41!!Xfeoftebz-!Gfcsvbsz!29-!3115!!5;67!QN

 

Summary of Contents for G310 Altos





































































































































Reviews:

No comments