manualshive.com logo in svg

Acer Ferrari One 200, Service Manual, Page: 46 / 184

Share
Download
Acer Ferrari One 200 Service Manual Download Page 46

36

Chapter 2

Miscellaneous Utilities

Using Boot Sequence Selector

Boot Sequence Selector allows the boot order to be changes without accessing the BIOS. To use Boot 
Sequence Selector, perform the following steps:

1.

Enter into DOS.

2.

Execute BS.exe to display the usage screen.

3.

Select the desired boot sequence by entering the corresponding sequence, for example, enter BS2 to 
change the boot sequence to HDD|CD ROM|LAN|Floppy.

Using DMITools

The DMI (Desktop Management Interface) Tool copies BIOS information to eeprom to be used in the DMI pool 
for hardware management. 

When the BIOS displays 

Verifying DMI pool data

 it is checking the table correlates with the hardware before 

sending to the operating system (Windows, etc.).

To update the DMI Pool, perform the following steps:

1.

Enter into DOS.

2.

Execute 

dmitools.exe

. The following messages show dmitools usage:

IMPORTANT:

The following write examples (2 to 5) require a system reboot to take effect

Summary of Contents for Ferrari One 200

























































































































































































Reviews:

No comments