
16
Chapter 1
System Memory
Video Specifications
Features
•
Supports AMD Athlon 64/Athlon 64FX/Opteron/AMD
Sempron/Mobile Sempron/Athlon XP-M and Turion
processors, Dual-core CPUs are supported.
•
A-Link Express II interface to AMD Northbridges; high data
transfer bandwidth(up to 2.5Gb/s / Lane)
•
PCI Host Bus controller
•
Supports PCI bus at 33MHz
•
PCI Rev. 2.3 specification support
•
Supports up to 6 bus master devices
•
5 OHCI and 2 EHCI Host controllers to supports 12 USB 2.0
ports and 2 dedicated USB 1.1 ports
•
AMD RAID Support - supports integrated RAID 0, RAID 1 and
RAID 10
•
SATA Controller
•
Supports six SATA ports with transfer rates up to 3Gb/s
•
Complies with SATA 2.5 specification.
•
Supports both SATA 1.5 and SATA 3.0 compliance
devices
•
Two operating mode supported: 1. Legacy Mode using I/
O space. 2. AHCI mode using the Memory space.
•
Supports e-SATA
•
Single PATA channel support
•
High Definition Audio
•
Support up to 4 codec’s
•
Up to 192kHz Sample Rate and 32-bit Audio
•
Unified Audio Architecture(UAA) compatible
•
4 Independent output streams(DMA)
•
4 Independent input streams(DMA)
•
ACPI specification 3.0 compliant power management
schemes
•
RTC / Timers integrated
Item
Specification
Memory Controller
Integrated with L310
Memory size
0MB (No on-board Memory)
DIMM socket number
2 sockets
Supports memory size per socket
2GB
Supports maximum memory size
4GB for 64bit OS (with two 2GB SO-DIMM)
Supports DIMM type
DDR2 Synchronous DRAM
Supports DIMM Speed
800/ 667 MHz
Support DIMM voltage
1.8V
Support DIMM package
200-pin DDR2-800/ 667 SO-DIMM
Memory module combinations
You can install memory modules in any combination as long as
they match the above specifications.
Item
Specification
Chipset
ATI Radeon™ HD 3200 Graphics
Item
Specification
Summary of Contents for Ferrari One 200
