Acer AW2000h-AW175h F1, Service Manual

Page: 104 / 106

92 Chapter 12
• < Alt > + < Enter >
• < Alt > + < Hyphen >
• < Alt > + < F4 >
• < Alt > + < Prnt Scrn >
• <Prnt Scrn>
• < F1 >
• < Alt > + < F1 >
• < Pause >
Options
The options menu allows you to configure the settings for Hotkey, Preferences, Full-Screen Mode, OSD UI
Style and Keyboard_Mouse_Hotplug for your console redirection.
Hotkey settings
This feature allows you to configure Hotkey settings for your console redirection.
• Set Hotkey : Click this item to configure your hotkey settings for your console redirection.
• The Hotkey Settings screen displays the following information:
• Hotkeys : Hotkeys: < Ctrl > + < 1 > to < Ctrl > + < 7 > are displayed on the right side of the screen.
• Actions : Click a hotkey to show the action corresponding to this hotkey on the left of the
screen.
• Keyboard Monitor : Click this item to enable keyboard monitor support.
• Assign : Click a hotkey and select an action from the actions menu, and then click Assign to
assign the action to the hotkey.
• Start : After an action is assigned to a hotkey, click Start to execute the command and complete
the assignment.
• Stop : After an action is assigned to a hot key, click Stop to cancel the selection.
• Close : After configuring the hotkey settings, click Close to close this submenu.
Preferences
Display
Recording Time : Check this box if you want video recording to be automatically turned off at a certain time.
Once the automatic stop is selected, enter the number of minutes before your video recording will be
automatically shut-off.
Display Scale : Use the handle on the slider to set the appropriate scale setting for your video display (from 25
to 100).
Image Quality : Check the High Color box for a network connection with heavier traffic. Check the Low Color
box for a network connection with lighter traffic. Click OK to use the settings set up by you.
Input
Mouse Settings : Click Input to configure mouse settings, including the following.
Enable Mouse Input : Check this box to use your mouse as an input device for your console redirection. Once
mouse support is enabled, select Absolute Mouse Mode if you use Windows; select Relative Mouse for
Linux.
Keyboard Settings : Check this box to use the keyboard as an input device for your console redirection. Once
keyboard support is enabled, you can configure repeat key timeout settings.
Repeat Key Timeout : Use the handle on the slider to select the appropriate timeout settings for repeat
keystrokes from 0 ms (millisecond) to 1000 ms (millisecond).