Acer Aspire 5530 Series Service Manual Download Page 25

Page: 25 / 208

Chapter 1

Special Key

You can locate the Euro symbol and the US dollar sign at the upper-center and/or bottom-right of your
keyboard.

The Euro symbol

Open a text editor or word processor.

Hold <Alt Gr> and then press the <5> key at the upper-center of the keyboard.

NOTE:

Note

: Some fonts and software do not support the Euro symbol. Please refer to

www.microsoft.com/

typography/faq/faq12.htm

for more information.

The US dollar sign

Open a text editor or word processor.

Hold

<Shift>

and then press the

<4>

key at the upper-center of the keyboard.

NOTE:

This function varies by the operating system version.

Summary of Contents for Aspire 5530 Series

















































































































































































































Search results

Summary of Contents for Aspire 5530 Series

Reviews:

Related manuals for Aspire 5530 Series

Brands by name

Popular brands

Acer Aspire 5530 Series, Service Manual

Search results

Summary of Contents for Aspire 5530 Series

Reviews:

Related manuals for Aspire 5530 Series

Brands by name

Popular brands