Acer ARMC_3P User Manual Download Page 112

Page: 112 / 136

100

RODUCT

SER

UIDE

Read Community

This is the SNMP community, which allows you to retrieve information via
SNMP.

Write Community

This community allows you to set options and to reset the ARMC/3P or the
host via SNMP, i.e. all that affects the host or the ARMC/3P.

System Location

Enter a description of the physical location of the host. The description will be
used in reply to the SNMP request “ sysLocation.0 ”.

System Contact

Enter a contact person for the host. The value will be used in reply to the
SNMP request “ sysContact.0 ”.

The ARMC/3P SNMP MIB

This link allows you to download the ARMC/3P SNMP MIB file. This file may
be necessary for an SNMP client to communicate with the ARMC/3P.

Summary of Contents for ARMC_3P








































































































































Search results

Summary of Contents for ARMC_3P

Reviews:

Related manuals for ARMC_3P

Brands by name

Popular brands

Acer ARMC_3P, User Manual

Search results

Summary of Contents for ARMC_3P

Reviews:

Related manuals for ARMC_3P

Brands by name

Popular brands