Acer ARMC_3P User Manual Download Page 72

Page: 72 / 136

RODUCT

SER

UIDE

Disable Drive Redirection

If enabled the Drive Redirection is switched off.

Force read-only connections

If enabled the Write Support for the Drive Redirection is switched off. It is not
possible to write on a redirected device.

Click

Apply

to submit your changes.

Software Requirements

To use this feature, you have to install the Drive Redirection software that is
currently only available for Microsoft Windows. This software can be

found

on your

ARMC/3P CD.

Configuration

Figure 57 Main View

Specify the parameters of the network connection (see Figure 57).

Device

This is the address (either the DNS name or the IP address) of the ARMC/3P
you would like to connect to.

Port

This is the network port. By default, ARMC/3P uses the remote console port
(#443) here. You may change this value if you have changed the remote
console port in your ARMC/3P’s network settings.

Summary of Contents for ARMC_3P








































































































































Search results

Summary of Contents for ARMC_3P

Reviews:

Related manuals for ARMC_3P

Brands by name

Popular brands

Acer ARMC_3P, User Manual

Search results

Summary of Contents for ARMC_3P

Reviews:

Related manuals for ARMC_3P

Brands by name

Popular brands