![background image](http://html1.mh-extra.com/html/acer/altos-g5450-series/altos-g5450-series_installation-and-configuration-manual_4051096088.webp)
Altos G5450 Installation Configuration Guide
76
Installation (with LSI MegaRAID SAS 8708ELP) ATI FireGL V5200 Driver
Installation section.
RAID Utility Installation
The MegaRAID Storage Manager for LSI MegaRAID SAS 8204ELP installation is
the same as LSI MegaRAID SAS 8708ELP installed. Please refer to the Red Hat
Enterprise Linux 4.0 Update 4 Installation (with LSI MegaRAID SAS 8708ELP)
RAID Utility Installation section.
Red Hat Enterprise Linux 4.0 Update 4 Installation (with
onboard SATA RAID)
Below information describes how to manually install Red Hat Enterprise Linux
4.0 Update 4 on Altos G5450 with onboard SATA RAID.
Drivers Required
For Red Hat Enterprise Linux 4.0 Update 4 Installation, the following device
drivers are required.
Device
Version
Directory on EasyBUILD
Onboard SATA
RAID
N/A N/A
Onboard NVIDIA
NFP3600 Chipset
N/A OS
built-in
Onboard NVIDIA
nForce Networking
Controller
0.60 \Disk\G5450\NIC\Nvidia\rhel4ud4
Onboard XGI Z9s
1.2.53
\Disk\G5450\onboard\xgiz9s\rhel4ud4
ATI FireGL V5200
8.35.5
N/A
Software Required
The management utility for onboard SATA RAID can be found in the EasyBUILD
7.1 build 600 (or later).
Software
Version
Directory on EasyBUILD
Onboard SATA
RAID utility
N/A N/A
Configuring onboard SATA RAID
Please refer to the Appendix A. for the onboard SATA RAID configuration.
Installation Tips
1.
Since Red Hat Enterprise Linux 4.0 Update4 cannot recognize the onboard
SATA RAID, you need to make a driver diskette from the EasyBUILD 7.1
build 600 (or later) first before the installation.
2.
Type linux dd when the prompt boot: appears at the start.