![background image](http://html1.mh-extra.com/html/acer/altos-g5450-series/altos-g5450-series_installation-and-configuration-manual_4051096082.webp)
Altos G5450 Installation Configuration Guide
70
Drivers Required
For Red Hat Enterprise Linux 4.0 EM64T Update 4 Installation, the following
device drivers are required.
Device
Version
Directory on EasyBUILD
Onboard SATA
RAID
N/A N/A
Onboard NVIDIA
NFP3600 Chipset
N/A OS
built-in
Onboard NVIDIA
nForce Networking
Controller
0.60 \Disk\g5450\nic\Nvidia\x64\rhel4ud4\
Onboard XGI Z9s
1.2.53
\Disk\g5450\onboard\xgiz9s\x64\rhel4u
d4
ATI FireGL V5200
8.35.5
N/A
Software Required
The management utility for onboard SATA RAID can be found in the EasyBUILD
7.1 build 600 (or later).
Software
Version
Directory on EasyBUILD
Onboard SATA
RAID utility
N/A N/A
Configuring onboard SATA RAID
Please refer to the Appendix A. for the onboard SATA RAID configuration.
Installation Tips
1.
Since Red Hat Enterprise Linux 4.0 EM64T Update4 cannot recognize the
onboard SATA RAID, you need to make a driver diskette before the
installation. The driver disk is not available in EasyBUILD 7.1 build 600 yet.
The driver will be available in GCSD website and next release of
EasyBUILD.
2.
Type linux dd when the prompt boot: appears at the start.
3.
Please select the fd0 as the Driver Disk Source.
4.
Follow the instruction to load the driver for onboard SATA RAID from the
driver diskette.
5.
At the Package Installation Defaults, select Customize software packages
to be installed.
6.
At the Package Group Selection step, select Graphic Internet under
Applications.
7.
If you have installed the ATI FireGL V5200 in the system, please also select
Development Tools and under Development. If you don’t have ATI FireGL
V5200, please go to next step directly