Altos G5450 Installation Configuration Guide
52
Windows XP Professional x64 Edition SP2 Installation (with LSI
MegaRAID SAS 8708ELP)
Below information describes how to manually install Windows XP Professional
x64 Edition on Altos G5450 with LSI MegaRAID SAS 8708ELP installed.
Drivers Required
For Windows XP x64 Installation, the following device drivers are required.
Device Version
Directory on EasyBUILD
LSI MegaRAID SAS
8708ELP
2.7.0.64 \Disk\g5450\sas\8708elp\x64\wsxp
Onboard NVIDIA
NFP3600 Chipset
Package 9.18
\Disk\g5450\onboard\Chipset\x64\wsxp
\
Onboard NVIDIA
nForce Networking
Controller
65.2.0.0
Including in chipset driver package
9.18
Onboard XGI Z9s
6.14.10.1080
\Disk\g5450\onboard\xgiz9s\x64\wsxp\
ATI FireGL V5200
8.323.1.0
\Disk\g5450\graphic\V5200\x64\wsxp\
Software Required
The management utility for LSI MegaRAID SAS 8708ELP and NIC can be found
in the EasyBUILD 7.1 build 600 (or later).
Software
Version
Directory on EasyBUILD
MegaRAID Storage
Manager
2.07-00 \app\g5450\sas\8204ELP\Windows\
ForceWare Network
Access Manager
65.16
Including in chipset driver package
9.18
Configuring LSI MegaRAID SAS 8708ELP
Please refer to the Appendix B. for the LSI MegaRAID SAS 8708ELP
configuration.
Installation Tips
1.
As Windows XP x64 can’t recognize the LSI MegaRAID SAS 8708ELP, you
need to make a driver diskette from the EasyBUILD 7.1 build 600 first
before the installation.
2.
Press F6 at the beginning of installation for providing the driver diskette
for the LSI MegaRAID SAS 8708ELP.
3.
Select “LSI Logic MegaRAID SAS RAID Controller Driver (Windows XP-64)”
as target driver
4.
After loading the RAID driver from diskette, follow the normal procedure
to finish the installation.
