49 Altos G5450 Installation Configuration Guide
Drivers Required
For Windows Vista Installation, the following device drivers are required.
Device Version
Directory on EasyBUILD
LSI MegaRAID SAS
8708ELP
2.10.0.32 \Disk\g5450\sas\8708elp\vista
Onboard NVIDIA
NFP3600 Chipset
Package 9.31
\Disk\g5450\onboard\Chipset\vista\
Onboard NVIDIA
nForce Networking
Controller
65.5.5.0
Including in chipset driver package
9.31
Onboard XGI Z9s
N/A
OS built-in
ATI FireGL V5200
N/A
OS built-in
Software Required
The management utility for LSI MegaRAID SAS 8708ELP can be found in the
EasyBUILD 7.1 build 600 (or later).
Software
Version
Directory on EasyBUILD
MegaRAID Storage
Manager
2.07-00 \app\g5450\sas\8204ELP\Windows\
Configuring LSI MegaRAID SAS 8708ELP
Please refer to the Appendix B. for the LSI MegaRAID SAS 8708ELP
configuration.
Installation Tips
1.
Though Windows Vista can recognize the LSI MegaRAID SAS 8708ELP, we
still replace the driver with the one in EasyBUILD. Please make the driver
diskette from the EasyBUILD 7.1 build 600 first before the installation.
2.
Please boot the system form the Windows Vista CD/DVD. Follow the
instructions to do the installation.
3.
When you see the “Where do you want to install Windows?” on the
screen, please insert the driver diskette and click on Load Driver.
4.
Click on OK. You will see the supported devices listed.
5.
Select “LSI MegaRAID SAS 8708ELP RAID (A:\oemsetup.inf)” and click on
Next.
6.
After the driver is loaded and returned to “Where do you want to install
Windows?” page, click on Next to continue the installation.
7.
Follow the instructions to finish the installation.
Chipset Driver Installation
1.
Please insert the EasyBUILD 7.1 build 600 (or later) into the optical drive
