![background image](http://html1.mh-extra.com/html/acer/altos-g5450-series/altos-g5450-series_installation-and-configuration-manual_4051096085.webp)
73 Altos G5450 Installation Configuration Guide
8.
After selecting the additional package, follow the normal procedure to
finish the installation.
Gigabit Ethernet Driver Installation
1.
You can find the onboard NVIDIA nForce Networking Controller driver in
EasyBUILD 7.1 build 600. Please refer to Directory on EasyBUILD in Driver
Required section and copy the driver from the EasyBUILD 7.1 build 600 to
HDD first.
# mount /media/cdrom
# cp /media/cdrom/Disk/g5450/nic/Nvidia/rhel4ud4/
nvlan-
rhel4.4-0.60-1.21.i686.rpm
/tmp
2.
Install the driver
# cd /tmp/
# rpm –ivh nvlan-rhel4.4-0.60-1.21.i686.rpm
VGA Driver Installation (onboard XGI Z9s)
1.
You can find the onboard XGI Z9s VGA driver in EasyBUILD 7.1 build 600.
Please refer to Directory on EasyBUILD in Driver Required section and
copy the driver from the EasyBUILD 7.1 build 600 to HDD first.
# mount /media/cdrom
# cp /media/cdrom/Disk/g5450/onboard/xgiz9s/rhel4ud4/
xgi_xf86_4.4.0-1.02.53-1.i386.rpm /tmp
2.
Install the driver
# cd /tmp/
# rpm –ivh
xgi_xf86_4.4.0-1.02.53-1.i386.rpm
VGA Driver Installation (ATI FireGL V5200)
1.
Please copy the ATI driver installer to HDD.
2.
Go to the directory that includes the ATI driver installer and run the ATI
driver installer.
# ./ati-driver-installer-8.35.5-x86.x86_64.run
3.
Follow the instructions and use the default settings to install the driver.
4.
After the driver is installed, run “aticonfig --initial” to configure the
driver.
# aticonfig –initial
Uninitialised file found. Configuring.
Using /etc/X11/xorg.conf
5.
Please reboot the system.