Chapter 7 General Front Panel Operation
99
•
Do not switch the controller’s and/or SCSI disk
drive’s power off during the SCSI Drive Low-level
Format. If any power failure occurs during a drive
low-level format, the formatting must be
performed again when power resumes.
•
All of the data stored in the SCSI disk drive will
be destroyed during a low-level format.
•
The SCSI disk drive on which a low-level disk
format will be performed cannot be a spare drive
(local or global) nor a member drive of a logical
drive. The "SCSI Drive Low-level Format" option
will not appear if the drive is not a "New Drive" or
a "Used Drive".
SCSI Drive Read/Write Test
If you would like to perform a drive/read
write test to the drive, press
t
or
s
to
select "Drive Read/Write Test"; and then
press <ENT>.
The option to run these utilities disappears after you
have created a logical drive. This is because running
these utilities will destroy data on a hard disk drive.
Drive Read/Write
Test ..
Summary of Contents for AcerAltos 3102RS
