Acer 700 Series User Manual Download | Manualshive

Page: 25 / 94

background image

AcerRouter 700 Series User Guide

3-5

SMART Menu

This part of the browser screen contains items you can click to display the various
screens for configuring your AcerRouter 700, including modems, connection profiles,
and protocols, as well as system monitoring, tools, and help.

Configuration Window

This is the window where the actual configuration screens appear. Before any sele
ction of the configuration is made, the window shows a picture of the AcerRouter 700
with cables and peripheral devices that can be connected to it.

Message Window

Whenever appropriate, the AcerRouter 700 will display system status or error me
ssages in this window. For example, when you try to connect to the Internet, if you
had configured your password incorrectly, the message window will display an
appropriate message.

System Status Monitoring Window

This section displays statistics and the status of all interfaces.This window is invoked
as a separate browser screen from the main SMART browser screen and appears au
tomatically each time you start SMART. If you close this window, you can always re
start it by clicking Monitoring - System Status from the SMART Menu. It does not
contain any toolbars or browser menu buttons. Although the main SMART screen
will timeout, this screen will not, and will continue to be operational as long as it is
active.

The following statistics are reported for each interface:

Device: lists all interfaces, including both the physical interface (i.e., the LAN port,
all modem ports and VPN tunnels), as well as logical connections that have been
activated (such as connections to the Internet or to remote offices).

Status: indicates the current state of the interface: For the LAN, Up means that the in
terface is up and functioning, Down means that this interface is not connected. For IS
DN B channels or VPN tunnels, if the interface is active, the profile name is displaye
d. NoCall means an ISDN B channel is idle. Inactive means the VPN tunnel is not
active.

Xmt Pkts: indicates the number of packets that have been transmitted through the in
terface.

Rcv Pkts: indicates the number of packets that the interface has received.

Device

Rcv Pkts

Err Pkts

Xmt Pkts

LAN

ISDN

Up

ISDN B2

NoCall

Status

ISDN B1

Up

ISP

12620

14266

0

15432

28236

6

8542

10426

0

0

0

Disconnect

Clear

nytunnel

Inactive

1003

1631

0

0

«
...
23
24
25
26
27
...
»

Summary of Contents for 700 Series































































































Reviews:

No comments

Related manuals for 700 Series

Brand: Panasonic Pages: 4

Brand: Patton electronics Pages: 2

ipRocketLink 3086FR

Brand: Patton electronics Pages: 6

Brand: Patton electronics Pages: 16

Brand: Patton electronics Pages: 51

Brand: Lindy Pages: 4

Brand: D-Link Pages: 83

Brand: Gbord Pages: 8

AT-8550/SP Series

Brand: Allied Telesis Pages: 114

Brand: Belkin Pages: 57

WGR614 - Wireless-G Router Wireless

Brand: NETGEAR Pages: 116

Brand: Lanner Pages: 38

Brand: Allied Telesis Pages: 34

Brand: Zoom Pages: 2

OmniStor 4900F Series

Brand: Rackable Systems Pages: 196

RoteFinder RF500S

Brand: Multi-Tech Pages: 134

Brand: Gbord Pages: 11

Brand: QRS Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands