AcerRouter 700 Series User Guide
6-7
menu:
Configuration - IP Filter
Step 1
From the Filtering Configuration screen, select the WAN profile of
interest from the pull down menu. For example, if your only need is to
access the Internet, you should only select the Internet access profile.
Step 2
Select send or discarded as desired, which is equivalent to allow and
disallow, respectively.
Step 3
If you are just starting, click Add to add a new selection rule. If you have
previously defined rules, you will see those rules shown as entries in the
rule table, and you can edit the rule by first highlighting the desired entry
in the rule table followed by clicking the Edit button.
Step 4
In case of adding a new selection rule, the following screen shows:
Filtering Configuration
ISP
Incorrect configuration may cause undesireable behavior. Please refer to the user
manual for more details
All IP packets for this profile
will be
discarded except for those matching one or more of the following rules.
sent
(Warning: Clicking the round button above changes the setting and takes effect immediately!)
Delete
Add
Edit
Select to
Edit
Rule
Number
Rule
Name
Local IP
Address(es)
Local
Port(s)
Remote IP
Address(es)
Remote
Port(s)
1
FTPin
192.168.168.22
21
Any
Any
2
HTTPout
Any
80
Any
Any
3
Manuf
192.168.168.110-
192.168.168.134
Any
Any
Any
