Accu-Steam™ G2 Gas Service Manual
21
SP8042-1911
Heat Lamp
AT0E-1800-2
Hi-Limit Lamp
AT0E-1800-2
Fault Lamp
AT0E-1800-2
1. Unplug from wall receptacle.
2. Lower front access panel by removing the
screws in the upper corners of the panel.
3. Locate the light bar and remove wires from
lamp (Fig 7.3B).
4. Remove nuts securing the light bar to the
front panel.
5. Remove lamp.
6. Reinstall in reverse order.
Fault Timer
AT0E-2500-3
1. Unplug from wall receptacle.
2. Lower front access panel by removing the
screws in the upper corners of the panel.
3. Locate the Fault timer, take note of wire
location and remove wires (Fig 7.3C).
4. Remove hardware securing timer.
5. Remove timer.
6. Reinstall in reverse order.
7. Set timer pot to 6 seconds.
Control Relay
AT0E-2825-6
1. Unplug from wall receptacle.
2. Lower front access panel by removing the
screws in the upper corners of the panel.
3. Take note of wire location.
4. Remove wires and hardware securing relay
(Fig 7.3A).
5. Reinstall in reverse order.
7.3 Ignition System Components
Fig 7.3C
Fig 7.3B
Fig 7.3A
Summary of Contents for Accu-Steam G2 Series
Page 34: ......
