background image

GR3E-2E0001 A0

ELECTRICAL GRIDDLE - MODEL  GR3E-2E0001 A0

-

PLEASE

   read these instructions carefully before operating this appliance.

-The temperature is thermostatically controlled between the range of 50ºC to 300ºC (122ºF 

to 572ºF). A signal lamp adjacent to the thermostat indicates when heating element is 
energized.

  

 

-This unit is designed   to operate on alternative current (A.C.) only. 
-

DO NOT CONNECT TO DIRECT CURRENT (D.C.)

-Care should be taken when operating this appliance as 

HOT SURFACES

 may cause 

burns.

-Ensure that the power   supply cord does not come into contact with hot surfaces.
-Do not leave unit in operation without an attendant.
-When not in use for long period unplug the appliance. 

INSTALLATION AND OPERATION

-Check if voltage of your power system corresponds to the same specified on the 

appliance label.

-

-After 30 minutes heating, turn temperature control down to operating desired 

temperature and grease plate, generously with butter or oil. Never allow excess of fat or 
oil to buildup as this will result in build-up of carbon on the plates, which should be 
removed with a scraper.

-Appliance is provided with grease drawer that receives grease and food scraped 

residues. 

-This appliance should be preheated before daily operation. Always allow 15 minutes 

preheat time before loading griddle with food to give griddle surface time to saturate.

-To turn off your appliance turn thermostat knob completely towards left.

CLEANING PROCEDURE

-Always ensure that the appliance is disconnected from the main power supply before 

cleaning.

-Try to scrape as much grease and residues from cooking surface as possible while the 

unit is still hot. 

-After appliance has cooled, clean cooking surface and body using only a damp cloth. 

Never use water jet or immerse appliance in water.

-Wipe off appliance with a dry cloth and wait at least half an hour before re-connecting to 

main power outlet.

IMPORTANT

Before using the appliance for the first time, remove the protection coating (MEDICINAL 
VASELINE) with a damp cloth and turn the control knob to 300ºC (572ºF), allow griddle 
to heat for +/- 30 minutes. You will notice some smoke appearing due to the protection 
coating and internal insulation burning, which is normal.

INSTRUCTION MANUAL

CROYDON

CROYDON

CROYDONMAQ INDUSTRIAL LTDA.

 

Estrada São Lourenço, 891 - Capivari - Duque de Caxias.

 RJ - Brasil - CEP 25243-150       Fax: 55 21 2676-2522
 Phone:  55 21 2776-1928  /  55 21 2676-1512
 e-mail: [email protected] 

Reviews: