Accurate Technology ProScale, Operation

Page: 19 / 53

Manual Part # 800-1402-002 Rev K, 072418 Page 19 of 53
Fundamental Readout
Functions
Auto On/Off Timer
To prolong battery life, the Readout has a built-in function that turns off the
Readout after a period of no movement or key activity. The Auto On/Off
function is programmable from 0 (always on), to 240 (minutes) before entering
sleep mode.
Press the
ON
/
OFF
key or move the measurement system to wake up the
Readout. Any key press or system motion while the Readout is awake restarts
the Auto On/Off timer.
Use
Programming Parameter (Pr12)
to set this interval.
Reading Direction
If the direction of readings, (increasing vs. decreasing) is opposite the desired
direction, use
Programming Parameter (Pr2)
to reverse the Reading Direction.
Resolution
The Readouts have four selectable display resolutions.
Fractions display mode is not affected by resolution changes.
.1in .1mm .1cm or
.01in .01mm .01cm or
.001in .01mm .001cm or
.0005in .01mm .001cm
Use
Programming Parameter (Pr4)
to set the displayed resolution.
Data displayed (and sent to the SPC output) is auto-ranging. This means the
selected resolution may be temporarily overridden if the measurement or
position to be displayed exceeds the maximum displayable value for the
programmed resolution. The Readout will continue to automatically reduce the
resolution to 1 decimal place or until an allowable resolution is achieved. The
available resolutions are:
Inch Resolution Maximum Displayed Value
4 decimal places
99.9999
3 decimal places
999.999
2 decimal places
9999.99
1 decimal place
99999.9
Millimeter Resolution Maximum Displayed Value
2 decimal places
9999.99
1 decimal place
99999.9