Accu-Steam GG24A, Installation & Operator'S Manual

Page: 38 / 56

Accu-Steam™ Gas G2 Installation and Operators Manual
MP5017-1702
PAGE 31
MODE LED Indicators DISPLAY NOTES
Set Preset
Temperature
All indicator LEDs
blinking. Then the
selected preset key
will blink for 3 -5
seconds.
Set Point Value Use the same process to change the
temperature as detailed in Set Temperature
(On the fly), to adjust the Set Temperature.
Once the correct temperature is displayed,
and before the five second time out, press
and hold the Preset Temp 1 key or
the Preset Temp 2 key to save the
displayed value to the desired preset key and
to exit this mode. Press the On/Off key
to exit without saving.
Default Values:
Preset 1 =
375°F
Preset 2 = 400°F
Display
Temperature
Mode
Current Temperature
function LED on
Actual temperature Pressing the Asterisk key and the Up
Arrow Key will display the current actual
temperature when the unit is in Ready Mode.
User Lockout
Mode
All LEDS on solid “ Loc ”or “ ULoc ” To Set USER LOCKOUT mode, press and hold
the On/Off key and the Asterisk
key for approximately four seconds while the
controller is ON. After four seconds, the USER
LOCKOUT parameter will toggle and the dis-
play will show either “ Loc ” or “ ULoc ”. When
buttons are released, the controller will store
the new USER LOCKOUT parameter value into
NVM.
Up Arrow key (Increment) and the
Down Arrow key (Decrement) will be
inoperable and the user can’t store new
values into the Preset 1 or 2 keys.
When Up Arrow key or the Down
Arrow key (Set temperature on the fly mode)
are held for three seconds the display will
show “ Loc ” when in the “Loc” mode
DIGITAL TEMPERATURE CONTROL QUICK REFERENCE