Accu-Steam GG24A, Installation & Operator'S Manual

Page: 34 / 56

Accu-Steam™ Gas G2 Installation and Operators Manual
MP5017-1702
PAGE 27
General
This appliance has a digital control
temperature board that has two modes of
operation.
• Operational Mode
• Manager Mode
Operational mode is the most used mode
and the appliance operates as the keyboard
overlay indicates during day to day product
production. (See Fig. 5)
Operational Mode Key Functions
ON/OFF Key -
Dual Function Key; In the
“ OFF” mode when pressed it turns on the
griddle. When “
ON
” pressing and holding the
key for five seconds turns the commercial
appliance off.
Up Arrow Key - This key when pressed will
increase the set cooking temperature. Unless
in the Loc mode. Press and hold key for
approximately three seconds to initialize the
temperature adjust mode.
Down Arrow Key - This key when pressed
will decrease the set cooking temperature.
Unless in the Loc mode. Press and hold key
for approximately three seconds to initialize
the temperature adjust mode.
PRESET TEMP 1 and 2 Key - When pressed
and held for three seconds the system will
select the preset set temperature that was set
previously or the factory default temperature
of
375°F
for Preset Temp 1 and 400°F for
Preset Temp 2 . LED 2 will flash for Preset
Temp 1 and LED 3 for Preset Temp 2 .
The current temperature will be displayed.
The temperature will increase or decrease
depending on the set temperature until it has
reached the preset temperature for that preset
key and The LED will then go solid and the
display will display
rdY
and remain at the set
temperature until the appliance is turned off
and back on.
Asterisk Key -Used as a multi-function
key for operation and programming
Alternate used instead of - Used
as a multi-function key for operation and
programming
Manager Mode Programming
Prior to using the commercial appliance
a few operational items need to be de-
termined.
• Default set temperature
• Preset 1 set temperature
• Preset 2 set temperature
• Operator lockout of set temperatures
or “on the fly” temperature set
Default Set Temperature - is the
temperature that the commercial
appliance will heat up to when turned on.
Preset 1 Set Temperature - is an al-
ternative set temperature that the com-
mercial appliance will heat up to when
activated from the keypad.
Preset 2 Set Temperature - is an al-
ternative set temperature that the com-
mercial appliance will heat up to when
activated from the keypad.
Set Temperature Lockout -
If turned
on in the manager mode will lock in the
set temperatures that were last saved in
memory. If not set to active( Loc ), the set
temperatures can be set lower or higher
than the last saved value.
OPERATION