Accu-Chek Guide User Manual Download Page 99

Page: 99 / 132

Meter and Lancing Device Cleaning and Disinfecting

How to Clean and Disinfect the Meter

WARNING

Failure to follow these instructions will damage the meter and stop it

from working properly.

• DO NOT clean or disinfect the meter while performing a blood glucose

or control test.

• DO NOT get any moisture in slots or openings.
• DO NOT spray anything onto the meter.
• DO NOT immerse the meter in liquid.
• Always use the same product for both cleaning and disinfecting.

Wash hands thoroughly with

soap and water.

Turn the meter off and wipe the

entire meter surface with a

Super Sani‑Cloth. Carefully

wipe around the test strip slot

and other openings.
Make sure that no liquid enters

any slot or opening.

A separate Super Sani‑Cloth

should be used for cleaning and

disinfection. For disinfecting the

meter, get a new cloth and

repeat step 2, making sure the

surface stays wet for 2 minutes.
Make sure that no solution is

seen in any slot or opening.

54988_08100918001_EN.indb 97

9/30/16 5:04 PM

Summary of Contents for Guide





































































































































Search results

Summary of Contents for Guide

Reviews:

Related manuals for Guide

Brands by name

Popular brands

Accu-Chek Guide, User Manual

Search results

Summary of Contents for Guide

Reviews:

Related manuals for Guide

Brands by name

Popular brands