manualshive.com logo in svg

Accu-Chek Guide, User Manual

The Accu-Chek Guide comes with a helpful Quick Start Manual that ensures a hassle-free experience for users. Accessible for free download at manualshive.com, this comprehensive manual provides clear instructions to get you started quickly and easily with your Accu-Chek Guide, enabling smooth diabetes management.

Share
Download
background image

115

Technical Information

10

Electromagnetic Compatibility

 – This meter meets the electromagnetic immunity requirements as  

per ISO 15197. The chosen basis for electrostatic discharge immunity testing was basic standard 

IEC 61000‑4‑2. In addition, the meter meets the electromagnetic emissions requirements as per 

EN 61326. The meter’s electromagnetic emission is thus low. Interference from the meter to other 

electrically‑driven equipment is not anticipated. 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 

2.  this device must accept any interference received, including interference that may cause undesired 

operation.

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled 

environment. This equipment is in direct contact with the body of the user under normal operating 

conditions. This transmitter must not be co‑located or operating in conjunction with any other antenna or 

transmitter.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, there is no guarantee that interference 

will not occur in a particular installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

•  Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance (i.e. the 

manufacturer) could void the user’s authority to operate the equipment.

54988_08100918001_EN.indb   115

9/30/16   5:04 PM

Summary of Contents for Guide





































































































































Reviews:

No comments

Related manuals for Guide

Medtronic MMT-7736L User Manual preview
MMT-7736L
Brand: Medtronic Pages: 56
Empecs Medical Device Medisign MM1100 BT User Manual preview
Medisign MM1100 BT
Brand: Empecs Medical Device Pages: 37
B. Braun Omnitest 5 Instructions preview
Omnitest 5
Brand: B. Braun Pages: 2
DDI prodigy autocode User Manual preview
prodigy autocode
Brand: DDI Pages: 39
TULA HEALTH THG001 Owner'S Manual preview
THG001
Brand: TULA HEALTH Pages: 45

Brands by name

Popular brands

Load more brands