Accelerated 6310-DX, User Manual, Page: 85 / 235

Custom Speed Test Server Custom Speed Test Server
Skill level:
Intermediate Intermediate
Goal Goal
To setup a custom speed test server and have your Accelerated 63xx-series cellular extender
perform speed tests to it.

The
Speed test Speed test command leverages the management tunnel established between the 63xx-series device
and Accelerated View. For details on the monthly data usage for this access, refer to the following
article:
Data Usage Estimates
Setup Setup
For this setup, you will need access to Accelerated View, and a 63xx-series cellular extender
online and syncing with Accelerated View. If you see the 63xx-series device listed as up (green
status) in Accelerated View, you are good to go.
Details Details
Accelerated View utilizes the IPSec tunnel the 63xx-series device establishes to
remote.accns.com to send remote commands to the device. One of the available commands a
user can run is the Perform Speed Test Perform Speed Test command. This will trigger the 63xx-series device to
perform a speed test to the speedtest server specified in its configuration settings. The default
speed test server is speedtest.accns.com.

Note: Note: In order to minimize the speed test's impact on cellular data consumption, the results are an
estimation of the available throughput of the device, and may not represent the full network speed
available.
This article will detail setting up a separate speed test server that a 63xx-series cellular extender
can use as an alternative to the default speed test server.
User Manual
Page 85 Page 85 6310-DX