Accelerated 6310-DX, User Manual

Page: 60 / 235

Setup Setup
This article assumes the 6310-DX Cellular Extender is operating under default settings, which
provides DHCP connectivity to device(s) connected on LAN port 1 of the 6310-DX. For more
details on the default settings of the 6310-DX, see the Default Settings section of the 6310-DX
User's Manual. Also, refer to the Getting started with Accelerated View for details on how to
configure a 6310-DX (or the Local device management section, if you are managing the device
without Accelerated View).
Configuration Steps Configuration Steps
Open the configuration profile for the 6310-MX and make the following changes.
1. Under
Network -> Interfaces -> WAN Network -> Interfaces -> WAN
, de-select the
Enabled Enabled
checkbox.
2. Under Network -> Bridges Network -> Bridges , create a new entry called LAN . LAN .
3. Under Network -> Bridges -> LAN -> Devices Network -> Bridges -> LAN -> Devices , click Add Add twice. Select Ethernet: LAN Ethernet: LAN from the
drop-down for one entry, and Ethernet: WAN Ethernet: WAN from the drop-down for the second entry.
4. Under
Network -> Interfaces -> LAN Network -> Interfaces -> LAN
, change
Device Device
to
Bridge: LAN Bridge: LAN
.
User Manual
Page 60 Page 60 6310-DX