Accelerated 6310-DX, User Manual, Page: 121 / 235

Carrier-Specific APN List (firmware 18.1 and Carrier-Specific APN List (firmware 18.1 and
prior) prior)
Goal Goal
To configure a customized APN list that will connect an Accelerated device to non-standard
APNs based off of the cellular carrier associated with the SIM card.

NOTE: NOTE: For a list of APNs automatically programmed into Accelerated's firmware settings, click here . The
APNs on that list don't typically need to be programmed manually.
Setup Setup
This article assumes that the the APN(s) being programmed in have been validated as the
correct APN associated with an active SIM card.
The configuration steps described below covers how to assign a custom APN list to a
configuration template in Accelerated View. It is important to keep in mind that the device
connecting over a custom APN may require an alternative Internet connection (via its Ethernet
WAN port) or a local configuration change before coming online to sync with its cloud template.
Click here for more information about staging a device for initial connectivity.
Sample Sample
The sample configuration outlined below shows how to associate the default modem entry with
one carrier (AT&T), and how to then create an additional modem interface associated with
another carrier (Verizon). The custom APNs for each carrier are to be nested under the
corresponding modem entry.
Sample Configuration Sample Configuration

NOTE: NOTE: You will need to know the custom APN for each SIM and/or Carrier. This is a sample configuration
specifically utilizing AT&T and Verizon SIMs. Any other carrier SIM cards will not match this connection
and will need to be configured with the corresponding Carriers and APNs.
1. Under Modem > Custom APN list Modem > Custom APN list , select the checkbox next to Enable Enable .
User Manual
Page 121 Page 121 6310-DX