Accelerated 6310-DX, User Manual

Page: 75 / 235

Sample Configuration Sample Configuration
Open the configuration profile for the 6310-DX and make the following changes.
1. In the Modem -> Metric Modem -> Metric entry, ensure the value is set to the same number set in the
Network -> Interfaces -> WAN -> IPv4 -> Metric Network -> Interfaces -> WAN -> IPv4 -> Metric setting.
2. In the Modem -> Weight Modem -> Weight entry, ensure the value is set to the same number set in the
Network -> Interfaces -> WAN -> IPv4 -> Weight Network -> Interfaces -> WAN -> IPv4 -> Weight setting. This will set a 1:1 ratio between the
two WAN interfaces, so each interface is handling 50% of the WAN network traffic.
NOTE: NOTE: The weight weight setting can be adjusted if you prefer to weigh the WAN traffic differently. For
example, if you instead want 75% of the WAN traffic to go through the Ethernet WAN interface,
and only 25% to go through the cellular modem's WAN interface (i.e. a 1:4 ratio), you would set
the weight of the Modem Modem interface to 33 and the weight of the WAN -> IPv4 WAN -> IPv4 interface to 12 12 (or
any 1:4 ratio of numbers, such as 11 and 44 , or 22 and 88 ).
User Manual
Page 75 Page 75 6310-DX