5.2 DVD Copier
This mode uses the hard drive as the default source for data copying. Here, as an introductory
example, we use one of the burners as the copying source.
(Note: To use the hard drive as the source, you have to load the data on the disc to some partition
of the hard drive first. Next, you should carry out the HDD to disc copying, i.e. 1 to 3. If you use
one of the burners as the copying source, you should perform the 1-to-2 copying operation.)
The duplicator controller has 13 functions in total, 10 sub-functions under the Function 9, 3 sub-
functions under the Function 10, 22 sub-functions under the Function 12 and 22 sub-functions
under the Function 13. These functions are listed below.
25
Duplicator controller
1. Copy
2. Test
3. Test&Copy
4. Verify
5. Compare
6. Prescan
7. Disc Info
8. Select Source
9. Image
10. Edit Track
11. Mode Select
12. Setup
In Function 7 there are 2 subfunctions.
7.1 Source
7.2 Target
7. Disc Info
13. Adv Setup
ARS-2051PC/2074C/2078C Manual
Summary of Contents for ARS-2051PC
Page 2: ......
