42
5.2.13.2 Overburn
Now press ESC and
▼
to enter the following figure. Overburn lets you decide whether to copy
beyond the limit of the media or not.
Press ENT to enter the following figure. The default is Off. Press
▼
to select On. Overburn may
cause a DVD writer to be damaged and data incomplete.
Overburn
Off
13-02. Adv Setup
Overburn
13-03. Adv Setup
Read Error Skip
5.2.13.3 Read Error Skip
Now press ESC and
▼
to enter the following figure. Read Error Skip is to ignore any error that
occurs during copying. Under normal circumstances, when an error occurs during copying, a
message will appear on LCD. Yet, you can use Read Error Skip to copy some defective medias.
Press ENT to enter the following figure. The default is Off. Press
▼
to select On.
Read Error Skip
Off
5.2.13.4 Format HDD
Now press ESC and
▼
to enter the following figure. Format HDD is to partition the hard disk. But
after formatting, all data on the hard disk will be deleted.
13-04. Adv Setup
Format HDD
If your copy controller doesn’t connect with a hard disk, LCD will show the message as follows.
No Valid HDD!
Select HDD First!
If your copy controller is connect with a hard disk, LCD will show the partition size is F_S.
HD Partition
SizeSelect? F_S
Press ENT to enter the following figure. All data on the hard drive will be lost after the format and
you are asked to confirm again. The default is No. Press
▼
to select Yes.
All data will be
Lost format? No
After the hard drive is formatted correctly, LCD will show the message as follow. Press ENT to
verify HDD or press
▼
and choose No to finish Format HDD.
Format HDD ok!
verify HDD? Yes
ARS-2051PC/2074C/2078C Manual
Summary of Contents for ARS-2051PC
Page 2: ......
