Acard ARS-2051PC User Manual Download Page 21 | Manualshive

Page: 21 / 55

background image

5.1.1 Mem. Card Copy

The “Mem. Card Copy” function copies the data of the source flash media directly to a blank disc.
Before copying, please make certain that the source flash media is inserted into the correct slot on
the card reader. Check the file size of the flash media and choose a proper disc. The flash media
follow sequential as: CF

→

SD

→

MS

→

USB.

When the source has more data than the capacity of the target disc, the system automatically
splits the data. However, if the data is an inseparable data block, the copying operation will be
aborted. In this case, please use a target disc with larger capacity than the source.

Choose the first function, “Copy”. Insert the source media into the correct slot on the card reader
and a blank disc into the DVD burner. You may use a rewritable disc with existing data. All the
existing data on that rewritable disc will be erased.

After the system detects the flash media and the target disc, press ENT to start copying. The
following message will be displayed on the LCD.

If the target disc has a smaller capacity than the source, you will be prompted, when the above
copying process is completed, to insert a new blank target disc to continue the copying process
until the source is fully duplicated. The following message will be displayed on the LCD.

Insert a blank disc and press ENT when you see the above message on the LCD. Then, the
following message will be displayed on the LCD.

After the source is fully duplicated, the following message will be displayed on the LCD. The data
volume and the copy time in the figure decrease while the completed percentage increases. Upon
completion of data copying, the following message will be displayed on the LCD. The successfully
duplicated disc will be ejected automatically.

Copy to Disc
OK:8 SKIP: 0

Copy next disk
Please wait ...

Change next disk
and press ENTER

Copying 28%
62.00MB 00:45

1. Mem. Card Copy

19

5.1.2 Verify

The “Verify” function verifies the duplicated DVD. Choose the second function, “Verify”.

Press ENT to start data verification. The following verification information will be displayed on the
LCD.

2. Verify

ARS-2051PC/2074C/2078C Manual

«
...
19
20
21
22
23
...
»

Summary of Contents for ARS-2051PC
























































Reviews:

No comments

Related manuals for ARS-2051PC

Brand: Gallagher Pages: 13

Brand: H&S Pages: 46

Brand: Unitech Pages: 18

Brand: Unitech Pages: 2

Brand: YOKO Pages: 45

Brand: NI Pages: 20

Brand: Hamlet Pages: 4

Brand: VDO Pages: 14

Sentinel-Prox DC-1023

Brand: AWID Pages: 12

Brand: Vitek Pages: 24

PowerScan PD8590-DPM

Brand: Datalogic Pages: 128

Brand: JMM Pages: 13

Brand: Delfi Pages: 46

Stretch VRC7000 Series

Brand: Exar Pages: 8

Brand: Intermec Pages: 2

Brand: Pyle Pages: 4

Brand: Compose Pages: 17

Brand: Dual Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands