Press ENT to see the details of target. If the comparison is identical, LCD will show the message
as follows.
If comparison fails, LCD will show the failure. By pressing ENT twice, LCD will show that the
contents of source and those of target do not match as follows.
5.2.9.5 Select Image
This function is to select a partition in the hard disk. First, select the function by pressing
▼
.
34
9-05. Image P:A
Select Image
After installing a hard disk, your copy controller will format it automatically. Each partition occupies
5GB. The number of partitions is dependent on the hard disk’s capacity. The partitions are
alphabetically arranged. Select a partition by pressing
▲ ▼
, and LCD will show the message as
follows.
Select Partition
A: DVD 4213.4MB
5.2.9.6 Image Src Drive
This function is to select DVD-ROM or any of the DVD writers as the source from which you can
load data into a particular partition as an image file.
First, select the function by pressing
▼
.
9-06. Image P:A
Image Src Drive
Tgt: 00 HDD P:A
Identical
Then, use
▲ ▼
to select DVD-ROM or any of the DVD writers as the source.
Select Img Src:
01 CH01 S-MUTLI
Tgt: 00 HDD P:A
TOC not match
After the partition is selected, LCD will show the results as follows.
Set Partition to
A
After selecting the source such as DVD-ROM, you can press ENT, and LCD will show the
message as follows.
Load image from
Drive ID-01
5.2.9.7 Image Format Info
This function is to see how you have formatted your hard disk. It is related to function 12.4 Format
HDD. There are 3 formats for choice: CD, DVD, and DL (Double Layer).
Now press ESC and
▼
to enter the following figure.
ARS-2051PC/2074C/2078C Manual
Summary of Contents for ARS-2051PC
Page 2: ......
