38
5.2.12.1 Lanuage
Now press ENT, and you will enter the following figure. The function Language lets you select a
language in which messages can be shown on LCD.
Press ENT. The default is English. Spanish, Japanese, Traditional Chinese and Simplified
Chinese are made to order.
12-02. Setup
Burn Speed
5.2.12.2 Burn Speed
Now press ESC and
▼
to enter the following figure. This function lets you control the burning
speed of CD writers.
Press ENT. The DVD Burn Speed will be shown and the default is 16X. Press
▼
for change the
selection. The next one is BD Burn Speed and the default setting is 4X then Press
▼
to change
the selection to CD Burn speed and the default setting is Maximum. Press
▼
for change to Audio
Burn Speed the selection and the default is Maximum.
12-03. Setup
Auto Start Drive
The default is Off. Press
▼
to select 1 (one blank DVD).
5.2.12.3 Auto Start Drive
System will auto start to copy or test once blank disc is ready.
12-01. Setup
Language
5.2.12.4 Auto Verify
To set if auto verify target disc's readability after copy function.
12-04. Setup
Auto Verify
Press ENT. The default is Off. Press
▼
to select On.
12-05. Setup
Auto Compare
5.2.12.5 Auto Compare
To set if auto do comparison after copy function to check if source and target disc are identical.
The default is Off. Press
▼
to select On.
12-06. Setup
Auto Prescan
5.2.12.6 Auto Prescan
To set if auto scan source disc before copy function.
The default is Off. Press
▼
to select On.
ARS-2051PC/2074C/2078C Manual
Summary of Contents for ARS-2051PC
Page 2: ......
