background image

FCC Statement 

This device compiles with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions:   
(1) This device may not cause harmful interference   
(2) This device must accept any interference received, 
including interference that may cause undesired operation. 

 

Warning!

 This equipment has been tested and found to 

comply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference 
when the equipment is operated in a commercial environment. 
This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to radio 
communications. Operation of this equipment in a residential 
area is likely to cause harmful interference in which case the 
user will be required to correct the interference at his own 
expense. 
 

CE-Mark Warning 

 
In a domestic environment this product may cause radio 
interference in which case the user may be required to take 
adequate measures. 
 
All Trademarks and trade names are the properties of their 
respective owners. 
 
Copyright © 2003, All right Reserved. 
 
Document Version: 2.0 
 
 

Summary of Contents for ENLGA-1320










Reviews: