1.2 System Requirements
To use the adapter, you need the following components:
One 32 or 64 bit PCI master mode expansion slot that is
compliant with PCI bus specifications
One 3.5-inch, 1.44MB diskette drive
The following cables:
Port Type
Media
Max.
Distance
10BASE-T
Cat. 3, 4, or 5 UTP 100 meter
100/1000BASE-T Cat. 5 or 5e UTP 100 meter
NOTE:
1000BASE-T signaling requires four twisted pairs of
Category 5 balanced cabling, as specified in ISO/IEC
11801:1995 and ANSI/EIA/TIA-568-A (1995) and
tested for additional performance using testing
procedures defined in TIA/EIA TSB95
2. Unpack and Inspect
Caution:
Under ordinary circumstances, this adapter card will not be
affected by static charge as may be received through your
body during handling of the unit .In special circumstances
where you may carry an extraordinarily high static charge, it
had better reduce the charge by touching a ground before
handling the adapter card.
Open the shipping gift box and carefully remove all items.
Please check the following items:
One Gigabit Ethernet PCI Adapter
One 3.5” drivers diskette
This user’s Manual
2
Note:
If any of the listed items are missing, please contact your
distributor or reseller
