AC S.A. All rights reserved. Copying, publishing, distribution and any usage of the full or partial data included in the herewith document, particularly pictures, drawings, illustrations, trade marks etc. is
strictly prohibited under the law.
Page 36 of 54
errors to the right panel by using the Select button. Errors from the right panel can be removed
only with the “Clear selected” button.
The errors will be cleared when the ignition is put to the ignition switch, on the condition that
there are recorded errors displayed in the right panel of the automatic clearing configuration
window.
Figure 2.1.22
The view of the OBD error clearing configuration window.
If there are other errors recorded for the vehicle, besides those configured in the auto
clearing tool, clearing will not be executed for safety reasons. Additionally, when engine
startup is too fast, automatic clearing may fail due to the fact that not all vehicles allow
error clearing when the engine is running.
Figure 2.1.23
"Errors" window.
Figure 2.1.23 presents a window used to set the maximum limit for cancellations of a single
error, some petrol controllers will be blocked when a specific error is cancelled more than 255
times (examples includePeugeot 508, 3008 1.6 THP).
