Warning:
If only one HDD is installed and this is set to
“Read-only”, then the device cannot make r
cordings.
Redundancy:
At least two HDDs are installed.
The redundant HDD makes an extra copy of the
recordings. This is used as a data backup.
•
R/W
At least one HDD must have the R/W status
(Read/Write). Otherwise, no recordings are possible.
Checking the HDD status
The status of each HDD can be checked in the “Maint
nance” menu. S.M.A.R.T. information (Self
Analysis and Reporting Technology) is stored in the log
data.
•
Call up the log file and search according to the info
mation/S.M.A.R.T. HDD (see page 45).
Setting up the HDD alarm
You can specify alarms to inform you of HDD errors.
•
To do this, call up “Exception” in the “System Se
tings” menu (see page 42).
If only one HDD is installed and this is set to
only”, then the device cannot make re-
The redundant HDD makes an extra copy of the
backup.
At least one HDD must have the R/W status
(Read/Write). Otherwise, no recordings are possible.
The status of each HDD can be checked in the “Mainte-
nance” menu. S.M.A.R.T. information (Self-Monitoring,
Analysis and Reporting Technology) is stored in the log
Call up the log file and search according to the infor-
).
You can specify alarms to inform you of HDD errors.
To do this, call up “Exception” in the “System Set-
Device menu
37
