Device menu
38
System Settings
Note
The “System Settings” menu is used to manage
all device settings.
Warning
Ensure that the date and time are set correctly.
IMPORTANT:
Subsequent changes to the settings can lead to
data loss!
Ensure a data backup has been made in good
time beforehand.
Overview
Menu
Setting
General
Language, video, time, date,
mouse pointer, password, time
zones and other settings
Camera
Adding, changing and selecting
analogue and IP cameras
Record
All recording settings (type,
resolution, motion detection,
schedule etc.)
Network
Required network settings
(manual IP, DHCP, PPPOE,
DDNS etc.) and network status
overview
Alarm
Assignment and parameteris
tion of detectors to alarm inputs
and relay outputs
PTZ
PTZ hardware parameters and
assignment to camera inputs
The “System Settings” menu is used to manage
Ensure that the date and time are set correctly.
Subsequent changes to the settings can lead to
Ensure a data backup has been made in good
Page
Language, video, time, date,
mouse pointer, password, time
Adding, changing and selecting
analogue and IP cameras
39
All recording settings (type,
resolution, motion detection,
23
Required network settings
(manual IP, DHCP, PPPOE,
DDNS etc.) and network status
47
Assignment and parameterisa-
tion of detectors to alarm inputs
52
PTZ hardware parameters and
assignment to camera inputs
27
Menu
Setting
RS232
Parameters on the serial conne
tion
Display
Display settings and assignment
of the event output
Exception Behaviour of the device in exce
tional cases (HDD full, network
disconnected etc.)
User
Adding and changing users, a
signing authorisation rights
Note
Pay attention to the instructions in the correspon
ing sections.
General Settings
22
“General” tab
Setting
Language
Language on the OSD
CVBS Output
Standard
PAL / NTSC
VGA Resolu-
tion
Resolution on the monitor
Time Zone
GMT (Greenwich Mean Time)
Menu Date
Format
MM-DD-YYYY, DD
YYYY-MM-DD
System Time
Date and time
Mouse Pointer
Speed
Set on the scroll bar (left =
low speed; right = high speed)
Enable Pass-
word
Box not ticked:
In order to enter a menu n
has to be en
work the password has to be entered.
Box ticked:
Password must be enter
use the menu
Page
Parameters on the serial connec-
41
Display settings and assignment
of the event output
22
Behaviour of the device in excep-
tional cases (HDD full, network
disconnected etc.)
42
Adding and changing users, as-
signing authorisation rights
42
Pay attention to the instructions in the correspond-
Language on the OSD
PAL / NTSC
Resolution on the monitor
GMT (Greenwich Mean Time)
YYYY, DD-MM-YYYY,
DD
Date and time
scroll bar (left =
low speed; right = high speed)
Box not ticked:
In order to enter a menu no password
entered. At access by net-
work the password has to be entered.
Box ticked:
Password must be entered in order to
use the menu.
