System operation
14
Connections on the rear of the device
Note
Pay attention to the overview on page 3.
No.
Name
Function
8
MAIN:
BNC video output
•
When using a VGA monitor:
No video signal is displayed.
•
When using no VGA monitor:
The main video signal is displayed.
VIDEO SPOT OUT:
BNC video output
•
The video spot signal is emitted.
9
VIDEO IN:
BNC inputs
10
VGA:
•
VGA monitor connection (9-pin), video output
signal
11
RS-232:
•
Serial port – no functionality
12
LAN:
•
Ethernet LAN connection
13
USB port
14
AUDIO IN:
Cinch inputs
•
Assigned to camera inputs 1 - 4
15
AUDIO OUT:
•
Cinch audio output (synchronised with main
video signal output)
16
ALARM IN:
•
RS-485 connection for PTZ cameras
•
Max. 16 alarm inputs
ALARM OUT:
•
Max. 4 relay outputs
17
LOOP OUT:
•
Connection for looped video signals (cable
available separately)
18
Connection for earthing line
19
Power switch and mains power connection:
•
100–240 V AC, 50–60 Hz
Operating elements on the remote control
Note
Pay attention to the remote control diagram on
page 4.
No.
Name
Function
20
POWER:
Switches on/off (hold down for 5 seconds)
21
DEV:
Assigns the remote control with the device ID
22
Alphanumeric keys:
•
Selects the camera (channel) in the live view
•
Entry of letters and digits in system fields
23
A:
Changes the entry format (upper / lower case,
symbols, digits)
24
PLAY:
Starts playback
25
VOIP:
•
Not used
26
PREV:
Changes the screen display in the live view
27
Navigation keys:
During playback:
•
,
Sets the speed
•
⊳
,
Previous / next day
In the live view:
•
Selects the camera (channel selection)
In menus:
•
Navigation
28
ESC:
•
Not used
