27
German
7. Firmware update
If a new firmware is available for your gateway, you will be notified after the connection with the gateway
and have the possibility to update directly. All settings are retained.
Updating the gateway takes about 3-5 minutes. Do not disconnect the gateway from the
power supply during this time!
More information about the changes can be found under the download tab on the product website:
www.abus.com/product/SHGW10000
8. Smartvest Compatibility
The ABUS Z-Wave Gateway is also compatible with the ABUS Smartvest wireless alarm system.
8.1.1. Connection between Z-Wave Gateway and Smartvest
You can integrate the Smartvest wireless alarm system into the gateway locally (also without Internet
access) or via the cloud. Thus the Smartvest and the Gateway can also be located in different networks
/ buildings. If the Smartvest is in another network, the DID must be entered manually when the
Smartvest is added.
8.1.2. Synchronized data
After a Smartvest has been assigned to the Gateway (as described above), the following data can be
synchronized between the Gateway and the Smartvest
•
Smartvest
o
Status (Active / Internal Active / Deactive)
o
Status Alarm (Alarm / Panic Alarm / 24H Alarm / Sabotage Alarm)
o
Temperature
o
Air humidity
•
Smartvest magnetic contact
o
device name
o
Status (Open / Closed)
o
sabotage contact
•
Smartvest motion detector
o
device name
o
Status (Movement / No movement)
o
sabotage contact
•
Smartvest vibration detector
o
device name
o
Status (Vibration / No vibration)
o
sabotage contact
