20
German
6.8.2. Setting the scene
The scene is divided into three conditions:
WHAT IF
Condition of a device required to trigger the scene.
(e.g. opening detector is "open")
Up to 6 conditions can be linked with "AND" or "OR" connections.
•
"AND": e.g. 6 of 6 conditions must be fulfilled
•
"OR": e.g. 1 of 6 conditions must be fulfilled
THEN
Actions that are to be switched through this scene.
(e.g. switch radio socket "on")
Up to 12 actions can be switched in a scene.
For each action, an action duration can be defined. The value "seconds"
can be clicked here (after checkbox is checked) to switch between
seconds, minutes or hours.
WHEN
Scenes can be associated with the additional condition of gateway status
"Home", "Away" and "Sleep".
(e.g. IF opening detector "open" / THEN switch radio socket "on" / IF at
status "at home")
Alternatively, you can link the scene to a time. Here you have the following
choice:
•
Always
•
Specific time period each day
•
Specific time period on specific days each week
•
Specific time period on specific days
A scene can also be saved without a WHEN condition. The time
value "Always" is automatically set for the scene.
If a condition has been defined incorrectly, click the condition to adjust it.
(e.g. temperature value incorrectly selected)
If an incorrect condition has been selected, press and hold the condition
to remove it.
Once a WHEN condition has been selected, it can no longer be
removed, but only modified by holding it down for a long time.
