15
German
6.5. Device page
On the device page, all essential status displays of the device are
displayed.
Actuators of the devices (e.g. radio socket) can be controlled directly by
clicking on the icon.
You can also perform the following actions:
Name
Change device name
Force Delete
Remove defective or inactive devices
Configuration
Open configuration page
Wake-up interval
Change wake-up interval
Room assigned
Change assigned room
Activate/deactivate push notification for the
respective status
6.5.1. Configuration page
Some devices allow the configuration of certain parameters. These can be
set via the configuration page.
Refer to the manual of the respective device to find out which parameter
settings are possible.
Recover value:
Enter the parameter, select the corresponding byte size (1 / 2 / 4 bytes)
and click on "GET".
Set value:
Enter the parameter and the value, select the byte size (1 / 2 / 4 bytes)
and click on "SET".
6.5.2. Wake-up interval
The wake-up interval determines how often a battery device wakes up and
reports to the gateway.
With the multisensor, for example, you can also set how often, for
example, the temperature value is to be transmitted.
A change in the wake-up interval will significantly affect the
battery life of the device. The stated battery life of ABUS
devices refers only to the standard wake-up interval! You can
find this information in the BDA of the device.
