13
German
6.4.1. Add / Remove ABUS device
After clicking on the "+" symbol, select the device you want to add or
remove under "ABUS" and follow the instructions in the app.
If the setup fails, you will be shown potential error sources in the app.
All ABUS devices (except LEDs) have the new S2 safety standard. For
some devices (e.g. multisensor) you must select a selection of the S2
method:
•
Enter DSK code
o
Enter the first five digits of the DSK code manually.
The first five digits are located on the unit and/or on the
DSK card supplied.
•
Scan DSK code
o
Scan the QR code here.
The QR code is located on the device or on the enclosed
DSK card.
•
No DSK/PIN code
o
Start the setup without the DSK code.
If a DSK code is enclosed with the component, the component
should be added by using the "Enter DSK Code" or "Scan DSK
Code" method. The method "No DSK/PIN code" may fail
partially for such components..
General information on the S2 safety standard:
The new S2 security standard closes a vulnerability that
allowed a potential attack at the time the device was first
paired.
You can find more information under:
wavealliance.org/mandatory-security-implementation-z-wave-
certified-iot-devices-takes-effect-today/
