18
Using the system
Remote Password
To set the remote password for a BMS or level-4 user.
App access
To enable or disable use of the Secoris App.
4.8.7 Deleting Users
If you are a master or admin user, you can use the Users – Delete User option to delete users.
Once you delete a user, the system does not respond to their access code. The control unit also deletes the
identity of any remote control or HUA transmitter assigned to the user.
Note:
You cannot delete User 001 (the default master user).
To delete a user:
1.
Select Users – Delete User.
2.
Press
s
or
t
followed by
✓
to select the user you wish to delete. Alternatively, enter the user
number (e.g. 004) and press
✓
.
DELETE User 004
Are you sure?
3.
Press
✓
to delete the user (or
✘
if you have changed your mind).
4.9 Omitting zones
You can omit a zone before setting the system. Omitting a zone prevents it from generating an alarm if the
zone is triggered while the system is set. You may, for example, want to omit a zone that protects a garage
to enable access without causing an alarm while the system is set.
Note:
The zone returns to normal operation when the system is unset.
Note:
You can omit only those zones that the installer has specified can be omitted.
To omit zones:
1.
Access the User menu, as described in the previous section.
2.
Select the
Omit Zones
option. The first zone you can omit is displayed. For example:
OMIT ZONES
Zone 000
An “O” is displayed at the end of the line if the zone is Omitted. An “I” is displayed if the zone is
Included.
