Absco Industries
Assembly Instruction Manual
ABSCO SIGNATURE PATIO
MODEL: ADPATIO6030
6.12m W x 3.11m D x up to 3.18m H
Model: ADPATIO6030
21/09/23
1.0
4
Existing Soffit
Existing Soffit
Gutter
Gutter
Existing Timber Fascia
Existing Steel Fascia
RECEIVER CHANNEL
0.
Refer to points 1 to 3 on page 2 before
beginning this step.
1.
Mount the first receiver channel
TR38
to the
existing structure using the correct fixing method
below.
Make sure the receiver channel is oriented with
the longer side to the top.
A.
Brickwork
Fix 14 x 45mm Tapcon screw every 450mm (not
suitable for structures with no eaves or two story
with blueboard over brick). Ensure a minimum of
5 courses above the receiver channel.
B.
Timber fascia
Fix the receiver channel
TR38
every 600mm to
the timber fascia with 12 x 50 Type 17 timber
screws.
C.
Steel Fascia
NOTE: This will require roofing to be removed to
access to rafter.
At every 900mm fit a supplied rafter bracket
BK5
to existing rafter.
Fix this to receiver channel
TR38
with a self
drilling tek or bolt.
Brickwork
Rafter
Existing
Truss
Rafter bracket
Roofing
Roofing
TR38
TR38
TR38
BK5
