Absco Industries
Assembly Instruction Manual
ABSCO SIGNATURE PATIO
MODEL: ADPATIO6030
6.12m W x 3.11m D x up to 3.18m H
Model: ADPATIO6030
21/09/23
1.0
16
Information in this manual has been designed in
accordance with the following Australian and New
Zealand Standards.
– National Construction Code of Australia 2022
– Specification S4C2—Design of Building in
Cyclonic Areas NCC2022 VOL 1
– Part H1D7 Sheet Roofing of NCC 2022 Vol 2
– AS 1163:1991 Structural Steel Hollow Sections
– AS/NZS 1170.0:2002 Structural Design Actions
Part 0— General Principles
– AS/NZS 1170.1:2002 Structural Design Actions
Part 1— Permanent, Imposed & Other Actions
– AS/NZS 1170.2:2021 Structural Design Actions
Part 2— Wind Actions
– AS/NZS 1170.3:2003 Design Actions Part 3—
Snow and Ice Actions
– AS/NZS 1554.1:2004 Structural Steel Welding—
Welding of Steel Structures
– AS1562.1: 2018 Design and installation of sheet
roof and wall cladding Part 1: Metal
– AS/NZS 1664.1:1997 Aluminium structures—
Limit state design
– AS 1684.2:2021 Residential Timber Framed
Construction
– AS 3566.1:2002 Self Drilling Screws
– AS 3600:2018 Concrete Structures
– AS 4055:2021 Wind Loads for Housing
– AS 4100:2020 Steel Structures Code
– AS/NZS 4600:2018 Cold Formed Steel Structures
Referenced Standards
